Product
Catalog

Pre-Cut Shims
Portable
Jack Bolts
Alignment
Bolts

Equiprotector

Sanitary
Pump Seals
Alfa-Laval Seals
APV Seals
Fristam® Seals
Tri-Clover® Seals
Waukesha® Seals
ANSI Pump Seals
ZA Sgl Cartridge Seal
ZN Sgl Cartridge Seal
ZND Dbl Cartridge Seal
Seal Application Sheet

Tri-Clover
® Parts
Waukesha® Parts
Waukesha® Pump Repair

Chemical Recovery
pH Control System
|
|
|
|
Do all double seals have to be alike?
Do double seals always need to use a lot of water?
|
| ZND Pump Seals |
|

The ZMT ZND double/tandem seal is the next generation double seal.
Unlike the competition, the ZND seal is designed to be universal in its use, to fit a broad range of applications, and be easily configured to any customer's most difficult application.
The ZND seal concept uses interchangable inner cartridges, for ease of change in seal faces and elastomer materials. The ZND seal's engineered high design limits allow it to fit any application. This unique design allows for maximum customer flexibility in seal use and minimal inventory to solve the most difficult applications.

The ZMT ZND double/tandem seal is the next generation double seal, because the Inner Cartridge can be changed to do the following:
Repair is simple, convenient, and inexpensive.
Four different Inner Cartridges to meet your needs:
a) Two Double/Tandem seals: ZND and the ZDT- shortened ZND seal.
b) Two Single seals: ZDN for common applications, and for high temperature applications the; ZH seal.
The unique features are as follows:
|
 |
Bi-directional pumping ring for better cooling and for an ultra-low flush, which dramatically reduces water consumption.
|
 |
The least expensive tandem seal on the market. Even priced better than most double seals.
 |
Repair is inexpensive and easy, with the Inner Cartridge.
|
 |
Convenient one-side flush connections.
 |
True tandem design offers full redundancy. Outer seal can operate under full product pressure, up to 400 psi. |
The ZND seal family is designed to operate cooler at higher pressures than the competition, up to 400 deg. F., and up to 400 psi. Consult the factory for the specifics of your application for a recommendation.
Remember . . . . . . . Heat Kills.
|
|
|
|
Mechanical Seals
Sanitary Process - Alignment
Products
Pump Parts - Wastewater
Treatment - Other |
| |
|
|
| |
|
|
|
Home
- About Us - Products
- Library - Policies - Contact Us

Fristam®, Tri-Clover®, and Waukesha® are trademarks of their respective companies. ZMT, Inc. is not a representative, nor affiliated with Alfa-Laval, APV, Fristam®, Tri-Clover®, or Waukesha®. |
|