About UsOur ProductsContact UsPolicies
Product Catalog
Alignment Products

 Pre-Cut Shims

 Portable Jack Bolts
 Alignment Bolts

Equipment Protection

 Equiprotector

Mechanical Seals

 Sanitary Pump Seals
    Alfa-Laval Seals

    APV Seals

    Fristam® Seals

    Tri-Clover® Seals

    Waukesha® Seals

 ANSI Pump Seals
    ZA Sgl Cartridge Seal

    ZN Sgl Cartridge Seal

    ZND Dbl Cartridge Seal

Pump Parts & Repair

 Tri-Clover ® Parts

 Waukesha® Parts

 Waukesha® Pump Repair

Wastewater Treatment

 Chemical Recovery

 pH Control System



ZM Environmental Technologies is committed to providing environmental and user friendly methods for treating Industrial Process Wastewater. We use unique methods and equipment that we have developed in order to control pH, to control BOD, secondary treatment and even reduction in your wastewater discharge. Our systems can handle up to 2 million gallons per day in a simple and economical process. Because of our innovation and a desire to look for a "better way", we have developed ideas that have lead to the development of equipment that operates for less than what any other wastewater treatment company can offer.

pH Control - ZM Technologies has developed a non-chemical method of solving pH control problems. Our unique process will lower or raise your wastewater pH without the use of chemicals. The products that we do use are environmentally friendly, do not require hazardous material permits, and are simple to use. We can totally eliminate the use of acid to lower the pH, and totally eliminate the use of chemicals to raise the pH.

Chemical Recovery - You no longer need to dump used caustic and acid down the drain after use. Save money by reducing chemical purchases, save by reducing effluent, and save by reducing the amount to treat before effluent discharge. Collect and clean your caustic after being used for use all over again. Our automated membrane system will perform for years without assistance, saving you money and time..

Solids Removal - ZM Environmental Technologies manufactures membrane systems for removing solids. The resulting BOD/COD reduction can be realized without the use of costly polymer chemicals, and solids can be removed without the inconsistency of DAF systems. Wastewater can be cleaned and reused by combining Ultrafiltration and either Nano or RO filtration systems that will provide pure water. Save a substantial amount money by eliminating effluent surcharges and eliminating chemical costs..

We believe in solving the environmental problems of Industrial Process Waste without creating other environmental problems, like keeping hazardous chemicals on site. Our wastewater treatment solutions are unique and innovative, yet offer the least expensive operating costs and are inexpensive to purchase as well. Giving the customer a Return-On-Investment from less than a year to two years.

Contact ZM Technologies with any questions or comments.


pH Control - Chemical Recovery - Solids Removal
Alignment Products - Equipment Protection - Mechanical Seals - Other
Home - About Us - Products - Library - Policies - Contact Us



Fristam®, Tri-Clover®, and Waukesha® are trademarks of their respective companies.
ZMT, Inc. is not a representative, nor affiliated with Alfa-Laval, APV, Fristam®, Tri-Clover®, or Waukesha®.

     

Copyright © 2000-2002 ZM Technologies.